Package | flashx.textLayout.compose |
Class | public final class TextFlowLine |
Inheritance | TextFlowLine Object |
Implements | IVerticalJustificationLine |
Language Version: | ActionScript 3.0 |
Runtime Versions: | Flash Player 10, AIR 1.5 |
Use this class to access information about how a line of text has been composed: its position,
height, width, and so on. When the text flow (TextFlow) is modified, the lines immediately before and at the
site of the modification are marked as invalid because they need to be recomposed. Lines after
the site of the modification might not be damaged immediately, but they might be regenerated once the
text is composed. You can access a TextFlowLine that has been damaged, but any values you access
reflect the old state of the TextFlow. When the TextFlow is recomposed, it generates new lines and you can
get the new line for a given position by calling TextFlow.flowComposer.findLineAtPosition()
.
Property | Defined By | ||
---|---|---|---|
absoluteStart : int [read-only]
The location of the line as an absolute character position in the TextFlow object. | TextFlowLine | ||
ascent : Number [read-only]
Specifies the number of pixels from the baseline to the top of the tallest characters in the line. | TextFlowLine | ||
columnIndex : int [read-only] The number of the column in which the line has been placed, with the first column being 0. | TextFlowLine | ||
constructor : Object
A reference to the class object or constructor function for a given object instance. | Object | ||
controller : ContainerController [read-only]
The controller (ContainerController object) for the container in which the line has been placed. | TextFlowLine | ||
descent : Number [read-only]
Specifies the number of pixels from the baseline to the bottom of the lowest-descending characters in the line. | TextFlowLine | ||
height : Number [read-only] The height of the line in pixels. | TextFlowLine | ||
lineOffset : Number [read-only]
The line's offset in pixels from the appropriate container inset (as dictated by paragraph direction and container block progression),
prior to alignment of lines in the paragraph. | TextFlowLine | ||
location : int [read-only]
One of the values from TextFlowLineLocation for specifying a line's location within a paragraph. | TextFlowLine | ||
paragraph : ParagraphElement [read-only]
The paragraph (ParagraphElement) in which the line resides. | TextFlowLine | ||
prototype : Object [static]
A reference to the prototype object of a class or function object. | Object | ||
spaceAfter : Number [read-only]
The amount of space to leave after the line. | TextFlowLine | ||
spaceBefore : Number [read-only]
The amount of space to leave before the line. | TextFlowLine | ||
textHeight : Number [read-only]
The height of the text line, which is equal to ascent plus descent. | TextFlowLine | ||
textLength : int [read-only]
The number of characters to the next line, including trailing spaces. | TextFlowLine | ||
textLineExists : Boolean [read-only]
Indicates whether the flash.text.engine.TextLine object for this TextFlowLine exists. | TextFlowLine | ||
unjustifiedTextWidth : Number [read-only]
The width of the line if it was not justified. | TextFlowLine | ||
validity : String [read-only] The validity of the line. | TextFlowLine | ||
x : Number
The horizontal position of the line relative to its container, expressed as the offset in pixels from the
left of the container. | TextFlowLine | ||
y : Number
The vertical position of the line relative to its container, expressed as the offset in pixels from the top
of the container. | TextFlowLine |
Method | Defined By | ||
---|---|---|---|
TextFlowLine(textLine:flash.text.engine:TextLine, paragraph:ParagraphElement, outerTargetWidth:Number = 0, lineOffset:Number = 0, absoluteStart:int = 0, numChars:int = 0) Constructor - creates a new TextFlowLine instance. | TextFlowLine | ||
Returns the bounds of the line as a rectangle. | TextFlowLine | ||
Returns the flash.text.engine.TextLine object for this line, which might be recreated
if it does not exist due to garbage collection. | TextFlowLine | ||
Indicates whether an object has a specified property defined. | Object | ||
Indicates whether an instance of the Object class is in the prototype chain of the object specified
as the parameter. | Object | ||
Indicates whether the specified property exists and is enumerable. | Object | ||
Sets the availability of a dynamic property for loop operations. | Object | ||
Returns the string representation of this object, formatted according to locale-specific conventions. | Object | ||
Returns the string representation of the specified object. | Object | ||
Returns the primitive value of the specified object. | Object |
absoluteStart | property |
absoluteStart:int
[read-only] Language Version: | ActionScript 3.0 |
Runtime Versions: | Flash Player 10, AIR 1.5 |
The location of the line as an absolute character position in the TextFlow object.
Implementation
public function get absoluteStart():int
See also
ascent | property |
ascent:Number
[read-only] Language Version: | ActionScript 3.0 |
Runtime Versions: | Flash Player 10, AIR 1.5 |
Specifies the number of pixels from the baseline to the top of the tallest characters in the line. For a TextLine that contains only a
graphic element, ascent
is set to 0.
Implementation
public function get ascent():Number
columnIndex | property |
columnIndex:int
[read-only] Language Version: | ActionScript 3.0 |
Runtime Versions: | Flash Player 10, AIR 1.5 |
The number of the column in which the line has been placed, with the first column being 0.
Implementation
public function get columnIndex():int
controller | property |
controller:ContainerController
[read-only] Language Version: | ActionScript 3.0 |
Runtime Versions: | Flash Player 10, AIR 1.5 |
The controller (ContainerController object) for the container in which the line has been placed.
Implementation
public function get controller():ContainerController
See also
descent | property |
descent:Number
[read-only] Language Version: | ActionScript 3.0 |
Runtime Versions: | Flash Player 10, AIR 1.5 |
Specifies the number of pixels from the baseline to the bottom of the lowest-descending characters in the line. For a TextLine that
contains only a graphic element, descent
is set to 0.
Implementation
public function get descent():Number
height | property |
height:Number
[read-only] Language Version: | ActionScript 3.0 |
Runtime Versions: | Flash Player 10, AIR 1.5 |
The height of the line in pixels.
Implementation
public function get height():Number
See also
lineOffset | property |
lineOffset:Number
[read-only] Language Version: | ActionScript 3.0 |
Runtime Versions: | Flash Player 10, AIR 1.5 |
The line's offset in pixels from the appropriate container inset (as dictated by paragraph direction and container block progression), prior to alignment of lines in the paragraph.
Implementation
public function get lineOffset():Number
location | property |
location:int
[read-only] Language Version: | ActionScript 3.0 |
Runtime Versions: | Flash Player 10, AIR 1.5 |
One of the values from TextFlowLineLocation for specifying a line's location within a paragraph.
Implementation
public function get location():int
See also
TextFlowLineLocation
paragraph | property |
paragraph:ParagraphElement
[read-only] Language Version: | ActionScript 3.0 |
Runtime Versions: | Flash Player 10, AIR 1.5 |
The paragraph (ParagraphElement) in which the line resides.
Implementation
public function get paragraph():ParagraphElement
See also
spaceAfter | property |
spaceAfter:Number
[read-only] Language Version: | ActionScript 3.0 |
Runtime Versions: | Flash Player 10, AIR 1.5 |
The amount of space to leave after the line.
If the line is the last line of a paragraph that has a space-after, the line will have
a spaceAfter
value. If the line comes at the bottom of a column, then the spaceAfter
is ignored. Otherwise, the line comes before another line in the column, and the following line must be positioned vertically to
insure that there is at least this much space left between this last line of the paragraph and the first
line of the following paragraph.
Implementation
public function get spaceAfter():Number
See also
spaceBefore | property |
spaceBefore:Number
[read-only] Language Version: | ActionScript 3.0 |
Runtime Versions: | Flash Player 10, AIR 1.5 |
The amount of space to leave before the line.
If the line is the first line of a paragraph that has a space-before applied, the line will have
a spaceBefore
value. If the line comes at the top of a column, spaceBefore
is ignored.
Otherwise, the line follows another line in the column, and it is positioned vertically to insure that there is
at least this much space left between this line and the last line of the preceding paragraph.
Implementation
public function get spaceBefore():Number
See also
textHeight | property |
textHeight:Number
[read-only] Language Version: | ActionScript 3.0 |
Runtime Versions: | Flash Player 10, AIR 1.5 |
The height of the text line, which is equal to ascent
plus descent
. The
value is calculated based on the difference between the baselines that bound the line, either
ideographic top and bottom or ascent and descent depending on whether the baseline at y=0
is ideographic (for example, TextBaseline.IDEOGRAPHIC_TOP) or not.
Implementation
public function get textHeight():Number
See also
textLength | property |
textLength:int
[read-only] Language Version: | ActionScript 3.0 |
Runtime Versions: | Flash Player 10, AIR 1.5 |
The number of characters to the next line, including trailing spaces.
Implementation
public function get textLength():int
textLineExists | property |
textLineExists:Boolean
[read-only] Language Version: | ActionScript 3.0 |
Runtime Versions: | Flash Player 10, AIR 1.5 |
Indicates whether the flash.text.engine.TextLine
object for this TextFlowLine exists.
The value is true
if the TextLine object has not been garbage collected and
false
if it has been.
Implementation
public function get textLineExists():Boolean
See also
unjustifiedTextWidth | property |
unjustifiedTextWidth:Number
[read-only] Language Version: | ActionScript 3.0 |
Runtime Versions: | Flash Player 10, AIR 1.5 |
The width of the line if it was not justified. For unjustified text, this value is the same as textLength
.
For justified text, this value is what the length would have been without justification, and textLength
represents the actual line width. For example, when the following String is justified and assigned a width of 500, it
has an actual width of 500 but an unjustified width of 268.9921875.
TBD: add graphic of justified line
Implementation
public function get unjustifiedTextWidth():Number
validity | property |
validity:String
[read-only] Language Version: | ActionScript 3.0 |
Runtime Versions: | Flash Player 10, AIR 1.5 |
The validity of the line.
A line can be invalid if the text, the attributes applied to it, or the controller settings have
changed since the line was created. An invalid line can still be displayed, and you can use it, but the values
used will be the values at the time it was created. The line represented by textLine
also will be in an
invalid state.
Implementation
public function get validity():String
See also
x | property |
x:Number
Language Version: | ActionScript 3.0 |
Runtime Versions: | Flash Player 10, AIR 1.5 |
The horizontal position of the line relative to its container, expressed as the offset in pixels from the left of the container.
Note: Although this property is technically read-write
,
you should treat it as read-only
. The setter exists only to satisfy the
requirements of the IVerticalJustificationLine interface that defines both a getter and setter for this property.
Use of the setter, though possible, will lead to unpredictable results.
Implementation
public function get x():Number
public function set x(value:Number):void
See also
y | property |
y:Number
Language Version: | ActionScript 3.0 |
Runtime Versions: | Flash Player 10, AIR 1.5 |
The vertical position of the line relative to its container, expressed as the offset in pixels from the top of the container.
Note: Although this property is technically read-write
,
you should treat it as read-only
. The setter exists only to satisfy the
requirements of the IVerticalJustificationLine interface that defines both a getter and setter for this property.
Use of the setter, though possible, will lead to unpredictable results.
Implementation
public function get y():Number
public function set y(value:Number):void
See also
TextFlowLine | () | Constructor |
public function TextFlowLine(textLine:flash.text.engine:TextLine, paragraph:ParagraphElement, outerTargetWidth:Number = 0, lineOffset:Number = 0, absoluteStart:int = 0, numChars:int = 0)
Language Version: | ActionScript 3.0 |
Runtime Versions: | Flash Player 10, AIR 1.5 |
Constructor - creates a new TextFlowLine instance.
Note: No client should call this. It's exposed for writing your own composer.
ParameterstextLine:flash.text.engine:TextLine — The TextLine display object to use for this line.
| |
paragraph:ParagraphElement — The paragraph (ParagraphElement) in which to place the line.
| |
outerTargetWidth:Number (default = 0 ) — The width the line is composed to, excluding indents.
| |
lineOffset:Number (default = 0 ) — The line's offset in pixels from the appropriate container inset (as dictated by paragraph direction and container block progression), prior to alignment of lines in the paragraph.
| |
absoluteStart:int (default = 0 ) — The character position in the text flow at which the line begins.
| |
numChars:int (default = 0 ) — The number of characters in the line.
|
See also
getBounds | () | method |
public function getBounds():Rectangle
Language Version: | ActionScript 3.0 |
Runtime Versions: | Flash Player 10, AIR 1.5 |
Returns the bounds of the line as a rectangle.
ReturnsRectangle — a rectangle that represents the boundaries of the line.
|
getTextLine | () | method |
public function getTextLine(forceValid:Boolean = false):flash.text.engine:TextLine
Language Version: | ActionScript 3.0 |
Runtime Versions: | Flash Player 10, AIR 1.5 |
Returns the flash.text.engine.TextLine
object for this line, which might be recreated
if it does not exist due to garbage collection. Set forceValid
to true
to cause the TextLine to be regenerated. Returns null if the TextLine cannot be recreated.
Parameters
forceValid:Boolean (default = false ) — if true, the TextLine is regenerated, if it exists but is invalid.
|
flash.text.engine:TextLine — object for this line or null if the TextLine object cannot be
recreated.
|
See also
isLineVisible | () | method |
tlf_internal function isLineVisible(wmode:String, x:int, y:int, w:int, h:int):Boolean
Check if the line is visible by comparing a set rectangle to the supplied rectangle (all values in Twips).
Parameters
wmode:String | |
x:int | |
y:int | |
w:int | |
h:int |
Boolean |
Thu May 20 2010, 02:19 AM -07:00