Indicates the object on which callback methods are invoked. The default is this NetConnection instance. If you set the client property to another object, callback methods will be invoked on that object.

Indicates whether the application is connected to a server through a persistent RTMP connection (true) or not (false). When connected through HTTP, this property is false, except when connected to Flash Remoting services on an application server, in which case it is true.

The proxy type used to make a successful connection to Flash Media Server. Possible values are: "none", "HTTP", "HTTPS", or "CONNECT".

The value is "none" if the connection is not tunneled or is a native SSL connection.

The value is "HTTP" if the connection is tunneled over HTTP.

The value is "HTTPS" if the connection is tunneled over HTTPS,

The value is "CONNECT" if the connection is tunneled using the CONNECT method through a proxy server.

The default object encoding for NetConnection objects. When an object is written to or read from binary data, the defaultObjectEncoding property indicates which Action Message Format (AMF) version is used to serialize the data: the ActionScript 3.0 format (ObjectEncoding.AMF3) or the ActionScript 1.0 and ActionScript 2.0 format (ObjectEncoding.AMF0).

The default value is ObjectEncoding.AMF3. Changing NetConnection.defaultObjectEncoding does not affect existing NetConnection instances; it affects only instances that are created subsequently.

To set an object's encoding separately (rather than setting object encoding for the entire application), set the objectEncoding property of the NetConnection object instead.

For more detailed information, see the description of the objectEncoding property.

See also

The identifier of the Flash Media Server instance to which this Flash Player or Adobe AIR instance is connected. This property is meaningful only for RTMFP connections. The value of this property is available only after an RTMFP connection is established.

See also

A value chosen substantially by Flash Media Server, unique to this connection. This value appears to the server as its client.nearNonce value. This value is defined only for RTMFP, RTMPE, and RTMPTE connections.

The total number of inbound and outbound peer connections that this instance of Flash Player or Adobe AIR allows. The default value is 8.

This value does not distinguish between publisher and subscriber connections. If this value is reduced while peer connections are present, the new value affects new incoming connections only. Existing connections are not dropped.

The identifier of this Flash Player or Adobe AIR instance for this NetConnection instance. This property is meaningful only for RTMFP connections.

Every NetConnection instance has a unique nearID property. No Flash Player or Adobe AIR instance or NetConnection instance has the same identifier.

Other Flash Player or Adobe AIR instances use this identifier as the peerID for new NetStream connections to this client. Subsequently, this identifier is the farID in any peer NetStream that connects to this instance.

See also

A value chosen substantially by this Flash Player or Adobe AIR instance, unique to this connection. This value appears to the server as its client.farNonce value. This value is defined only for RTMFP, RTMPE, and RTMPTE connections.

The object encoding for this NetConnection instance.

When an object is written to or read from binary data, the defaultObjectEncoding property indicates which Action Message Format (AMF) version is used to serialize the data: the ActionScript 3.0 format (ObjectEncoding.AMF3) or the ActionScript 1.0 and ActionScript 2.0 format (ObjectEncoding.AMF0). Set the objectEncoding property to set an AMF version for a NetConnection instance.

It's important to understand this property if your application needs to communicate with servers released prior to Flash Player 9. The following three scenarios are possible:

• Connecting to a server that supports AMF3 (for example, Flex Data Services 2 or Flash Media Server 3). The default value of defaultObjectEncoding is ObjectEncoding.AMF3. All NetConnection instances created in this file use AMF3 serialization, so you don't need to set the objectEncoding property.
• Connecting to a server that doesn't support AMF3 (for example, Flash Media Server 2). In this scenario, set the static NetConnection.defaultObjectEncoding property to ObjectEncoding.AMF0. All NetConnection instances created in this SWF file use AMF0 serialization. You don't need to set the objectEncoding property.
• Connecting to multiple servers that use different encoding versions. Instead of using defaultObjectEncoding, set the object encoding on a per-connection basis using the objectEncoding property for each connection. Set it to ObjectEncoding.AMF0 to connect to servers that use AMF0 encoding, such as Flash Media Server 2, and set it to ObjectEncoding.AMF3 to connect to servers that use AMF3 encoding, such as Flex Data Services 2.

Once a NetConnection instance is connected, its objectEncoding property is read-only.

If you use the wrong encoding to connect to a server, the NetConnection object dispatches the netStatus event. The NetStatusEvent.info property contains an information object with a code property value of NetConnection.Connect.Failed, and a description explaining that the object encoding is incorrect.

See also

The protocol used to establish the connection. This property is relevant when using Flash Media Server. Possible values are as follows:

• "rtmp": Real-Time Messaging Protocol (RTMP)
• "rtmpe": Encrypted RTMP
• "rtmpt": HTTP tunneling RTMP
• "rtmpte": HTTP tunneling encrypted RTMP
• "rtmps": HTTPS-based RTMP
• "rtmfp": Real-Time Media Flow Protocol (RTMFP)

Determines which fallback methods are tried if an initial connection attempt to Flash Media Server fails. Set the proxyType property before calling the NetConnection.connect() method.

Acceptable values are "none", "HTTP", "CONNECT", and "best".The default value is "none".

To use native SSL, set the property to "best". If the player cannot make a direct connection to the server (over the default port of 443 or over another port that you specify) and a proxy server is in place, the player tries to use the CONNECT method. If that attempt fails, the player tunnels over HTTPS.

If the property is set to "HTTP" and a direct connection fails, HTTP tunneling is used. If the property is set to "CONNECT" and a direct connection fails, the CONNECT method of tunneling is used. If that fails, the connection does not fall back to HTTP tunneling.

This property is applicable only when using RTMP, RTMPS, or RTMPT. The CONNECT method is applicable only to users who are connected to the network by a proxy server.

An object that holds all of the peer subscriber NetStream objects that are not associated with publishing NetStream objects. Subscriber NetStream objects that are associated with publishing NetStream objects are in the NetStream.peerStreams array.

See also

The URI passed to the NetConnection.connect() method. If NetConnection.connect() hasn't been called or if no URI was passed, this property is undefined.

Indicates whether a secure connection was made using native Transport Layer Security (TLS) rather than HTTPS. This property is valid only when a NetConnection object is connected.

Creates a NetConnection object. Call the connect() method to make a connection.

If an application needs to communicate with servers released prior to Flash Player 9, set the NetConnection object's objectEncoding property.

The following code creates a NetConnection object:

     var nc:NetConnection = new NetConnection();
     

See also

Adds a context header to the Action Message Format (AMF) packet structure. This header is sent with every future AMF packet. If you call NetConnection.addHeader() using the same name, the new header replaces the existing header, and the new header persists for the duration of the NetConnection object. You can remove a header by calling NetConnection.addHeader() with the name of the header to remove an undefined object.

Parameters

Calls a command or method on Flash Media Server or on an application server running Flash Remoting. Before calling NetConnection.call() you must call NetConnection.connect() to connect to the server. You must create a server-side function to pass to this method.

You cannot connect to commonly reserved ports. For a complete list of blocked ports, see "Restricting Networking APIs" in the ActionScript 3.0 Developer's Guide.

Parameters

See also

Closes the connection that was opened locally or to the server and dispatches a netStatus event with a code property of NetConnection.Connect.Closed.

This method disconnects all NetStream objects running over the connection. Any queued data that has not been sent is discarded. (To terminate local or server streams without closing the connection, use NetStream.close().) If you close the connection and then want to create a new one, you must create a new NetConnection object and call the connect() method again.

The close() method also disconnects all remote shared objects running over this connection. However, you don't need to recreate the shared object to reconnect. Instead, you can just call SharedObject.connect() to reestablish the connection to the shared object. Also, any data in the shared object that was queued when you issued NetConnection.close() is sent after you reestablish a connection to the shared object.

With Flash Media Server, the best development practice is to call close() when the client no longer needs the connection to the server. Calling close() is the fastest way to clean up unused connections. You can configure the server to close idle connections automatically as a back-up measure. For more information, see the Flash Media Server Configuration and Administration Guide.

See also

Creates a two-way connection to an application on Flash Media Server or to Flash Remoting, or creates a two-way network endpoint for RTMFP peer-to-peer group communication. To report its status or an error condition, a call to NetConnection.connect() dispatches a netStatus event.

Call NetConnection.connect() to do the following:

• Pass "null" to play video and mp3 files from a local file system or from a web server.
• Pass an "http" URL to connect to an application server running Flash Remoting. Use the NetServices class to call functions on and return results from application servers over a NetConnection object. For more information, see the Flash Remoting documentation.
• Pass an "rtmp/e/s" URL to connect to a Flash Media Server application.
• Pass an "rtmfp" URL to create a two-way network endpoint for RTMFP client-server, peer-to-peer, and IP multicast communication.
• Pass the string "rtmfp:" to create a serverless two-way network endpoint for RTMFP IP multicast communication.

Consider the following security model:

• By default, Flash Player or AIR denies access between sandboxes. A website can enable access to a resource by using a URL policy file.
• Your application can deny access to a resource on the server. In a Flash Media Server application, use Server-Side ActionScript code to deny access. See the Flash Media Server documentation.
• You cannot call NetConnection.connect() if the calling file is in the local-with-file-system sandbox.
• You cannot connect to commonly reserved ports. For a complete list of blocked ports, see "Restricting Networking APIs" in the ActionScript 3.0 Developer's Guide.
• To prevent a SWF file from calling this method, set the allowNetworking parameter of the the object and embed tags in the HTML page that contains the SWF content.

However, in Adobe AIR, content in the application security sandbox (content installed with the AIR application) are not restricted by these security limitations.

For more information about security, see the Adobe Flash Player Developer Center: Security.

Parameters

See also

Dispatched when an exception is thrown asynchronously — that is, from native asynchronous code.

This event has the following properties:

Dispatched when an input or output error occurs that causes a network operation to fail.

This event has the following properties:

Dispatched when a NetConnection object is reporting its status or error condition. The netStatus event contains an info property, which is an information object that contains specific information about the event, such as whether a connection attempt succeeded or failed.

This event has the following properties:

See also

Dispatched if a call to NetConnection.call() attempts to connect to a server outside the caller's security sandbox.

This event has the following properties:

See also

In this example, the code that creates the Video and NetStream objects and calls the Video.attachNetStream() and NetStream.play() methods is placed in a handler function. The handler is called only if the attempt to connect to the NetConnection object is successful; that is, when the netStatus event returns an info object with a code property that indicates success. It is recommended that you wait for a successful connection before you call NetStream.play().

package {
    import flash.display.Sprite;
    import flash.events.NetStatusEvent;
    import flash.events.SecurityErrorEvent;
    import flash.media.Video;
    import flash.net.NetConnection;
    import flash.net.NetStream;
    import flash.events.Event;

    public class NetConnectionExample extends Sprite {
        private var videoURL:String = "Video.flv";
        private var connection:NetConnection;
        private var stream:NetStream;

        public function NetConnectionExample() {
            connection = new NetConnection();
            connection.addEventListener(NetStatusEvent.NET_STATUS, netStatusHandler);
            connection.addEventListener(SecurityErrorEvent.SECURITY_ERROR, securityErrorHandler);
            connection.connect(null);
        }

        private function netStatusHandler(event:NetStatusEvent):void {
            switch (event.info.code) {
                case "NetConnection.Connect.Success":
                    connectStream();
                    break;
                case "NetStream.Play.StreamNotFound":
                    trace("Stream not found: " + videoURL);
                    break;
            }
        }

        private function securityErrorHandler(event:SecurityErrorEvent):void {
            trace("securityErrorHandler: " + event);
        }

        private function connectStream():void {
            var stream:NetStream = new NetStream(connection);
            stream.addEventListener(NetStatusEvent.NET_STATUS, netStatusHandler);
            stream.client = new CustomClient();
            var video:Video = new Video();
            video.attachNetStream(stream);
            stream.play(videoURL);
            addChild(video);
        }
    }
}

class CustomClient {
    public function onMetaData(info:Object):void {
        trace("metadata: duration=" + info.duration + " width=" + info.width + " height=" + info.height + " framerate=" + info.framerate);
    }
    public function onCuePoint(info:Object):void {
        trace("cuepoint: time=" + info.time + " name=" + info.name + " type=" + info.type);
    }
}