The angle of the bevel. Valid values are from 0 to 360°. The default value is 45°.

The angle value represents the angle of the theoretical light source falling on the object and determines the placement of the effect relative to the object. If the distance property is set to 0, the effect is not offset from the object and, therefore, the angle property has no effect.

The amount of horizontal blur, in pixels. Valid values are from 0 to 255 (floating point). The default value is 4. Values that are a power of 2 (such as 2, 4, 8, 16, and 32) are optimized to render more quickly than other values.

The amount of vertical blur, in pixels. Valid values are from 0 to 255 (floating point). The default value is 4. Values that are a power of 2 (such as 2, 4, 8, 16, and 32) are optimized to render more quickly than other values.

The offset distance of the bevel. Valid values are in pixels (floating point). The default is 4.

The alpha transparency value of the highlight color. The value is specified as a normalized value from 0 to 1. For example, .25 sets a transparency value of 25%. The default value is 1.

The highlight color of the bevel. Valid values are in hexadecimal format, 0xRRGGBB. The default is 0xFFFFFF.

Applies a knockout effect (true), which effectively makes the object's fill transparent and reveals the background color of the document. The default value is false (no knockout).

The number of times to apply the filter. The default value is BitmapFilterQuality.LOW, which is equivalent to applying the filter once. The value BitmapFilterQuality.MEDIUM applies the filter twice; the value BitmapFilterQuality.HIGH applies it three times. Filters with lower values are rendered more quickly.

For most applications, a quality value of low, medium, or high is sufficient. Although you can use additional numeric values up to 15 to achieve different effects, higher values are rendered more slowly. Instead of increasing the value of quality, you can often get a similar effect, and with faster rendering, by simply increasing the values of the blurX and blurY properties.

You can use the following BitmapFilterQuality constants to specify values of the quality property:

• BitmapFilterQuality.LOW
• BitmapFilterQuality.MEDIUM
• BitmapFilterQuality.HIGH

The alpha transparency value of the shadow color. This value is specified as a normalized value from 0 to 1. For example, .25 sets a transparency value of 25%. The default is 1.

The shadow color of the bevel. Valid values are in hexadecimal format, 0xRRGGBB. The default is 0x000000.

The strength of the imprint or spread. Valid values are from 0 to 255. The larger the value, the more color is imprinted and the stronger the contrast between the bevel and the background. The default value is 1.

The placement of the bevel on the object. Inner and outer bevels are placed on the inner or outer edge; a full bevel is placed on the entire object. Valid values are the BitmapFilterType constants:

• BitmapFilterType.INNER
• BitmapFilterType.OUTER
• BitmapFilterType.FULL

Initializes a new BevelFilter instance with the specified parameters.

See also

Returns a copy of this filter object.

1. Import the required classes.
2. Declare three properties used in the draw() function, which draws the object to which the bevel filter is applied.
3. Create the BevelFilterExample() constructor function, which does the following:
   • Calls the draw() function, which is declared later.
   • Declares a variable filter as a BitmapFilter object and assigns it to the return of a call to getBitmapFilter().
   • Creates a new Array object myFilters and adds filter to the array, and assigns myFilters to the filters property of BevelFilterExample object. This applies all filters found in myFilters, which in this case is only filter.
4. Create the getBitmapFilter function to create and set properties for the filter.
5. Create the draw() function. This function uses methods of the Graphics class, accessed through the graphics property of the Sprite class, to draw the square.

package {
    import flash.display.Sprite;
    import flash.filters.BevelFilter;
    import flash.filters.BitmapFilter;
    import flash.filters.BitmapFilterQuality;
    import flash.filters.BitmapFilterType;

    public class BevelFilterExample extends Sprite {
        private var bgColor:uint = 0xFFCC00;
        private var size:uint    = 80;
        private var offset:uint  = 50;

        public function BevelFilterExample() {
            draw();
            var filter:BitmapFilter = getBitmapFilter();
            var myFilters:Array = new Array();
            myFilters.push(filter);
            filters = myFilters;
        }

        private function getBitmapFilter():BitmapFilter {
            var distance:Number       = 5;
            var angleInDegrees:Number = 45;
            var highlightColor:Number = 0xFFFF00;
            var highlightAlpha:Number = 0.8;
            var shadowColor:Number    = 0x0000FF;
            var shadowAlpha:Number    = 0.8;
            var blurX:Number          = 5;
            var blurY:Number          = 5;
            var strength:Number       = 5;
            var quality:Number        = BitmapFilterQuality.HIGH;
            var type:String           = BitmapFilterType.INNER;
            var knockout:Boolean      = false;

            return new BevelFilter(distance,
                                   angleInDegrees,
                                   highlightColor,
                                   highlightAlpha,
                                   shadowColor,
                                   shadowAlpha,
                                   blurX,
                                   blurY,
                                   strength,
                                   quality,
                                   type,
                                   knockout);
        }

        private function draw():void {
            graphics.beginFill(bgColor);
            graphics.drawRect(offset, offset, size, size);
            graphics.endFill();
        }
    }
}