Adobe® Flex® 4 Language Reference
Show Packages and Classes List |  Packages  |  Classes  |  Index  |  Appendixes
mx.managers 
LayoutManager 
Packagemx.managers
Classpublic class LayoutManager
InheritanceLayoutManager Inheritance EventDispatcher Inheritance Object
Implements ILayoutManager

Language Version: ActionScript 3.0
Product Version: Flex 3
Runtime Versions: Flash Player 9, AIR 1.1

The LayoutManager is the engine behind Flex's measurement and layout strategy. Layout is performed in three phases; commit, measurement, and layout.

Each phase is distinct from the others and all UIComponents of one phase are processed prior to moving on to the next phase. During the processing of UIComponents in a phase, requests for UIComponents to get re-processed by some phase may occur. These requests are queued and are only processed during the next run of the phase.

The commit phase begins with a call to validateProperties(), which walks through a list (reverse sorted by nesting level) of objects calling each object's validateProperties() method.

The objects in the list are processed in reversed nesting order, with the least deeply nested object accessed first. This can also be referred to as top-down or outside-in ordering.

This phase allows components whose contents depend on property settings to configure themselves prior to the measurement and the layout phases. For the sake of performance, sometimes a component's property setter method does not do all the work to update to the new property value. Instead, the property setter calls the invalidateProperties() method, deferring the work until this phase runs. This prevents unnecessary work if the property is set multiple times.

The measurement phase begins with a call to validateSize(), which walks through a list (sorted by nesting level) of objects calling each object's validateSize() method to determine if the object has changed in size.

If an object's invalidateSize() method was previously called, then the validateSize() method is called. If the size or position of the object was changed as a result of the validateSize() call, then the object's invalidateDisplayList() method is called, thus adding the object to the processing queue for the next run of the layout phase. Additionally, the object's parent is marked for both measurement and layout phases, by calling invalidateSize() and invalidateDisplayList() respectively.

The objects in the list are processed by nesting order, with the most deeply nested object accessed first. This can also be referred to as bottom-up inside-out ordering.

The layout phase begins with a call to the validateDisplayList() method, which walks through a list (reverse sorted by nesting level) of objects calling each object's validateDisplayList() method to request the object to size and position all components contained within it (i.e. its children).

If an object's invalidateDisplayList() method was previously called, then validateDisplayList() method for the object is called.

The objects in the list are processed in reversed nesting order, with the least deeply nested object accessed first. This can also be referred to as top-down or outside-in ordering.

In general, components do not override the validateProperties(), validateSize(), or validateDisplayList() methods. In the case of UIComponents, most components override the commitProperties(), measure(), or updateDisplayList() methods, which are called by the validateProperties(), validateSize(), or validateDisplayList() methods, respectively.

At application startup, a single instance of the LayoutManager is created and stored in the UIComponent.layoutManager property. All components are expected to use that instance. If you do not have access to the UIComponent object, you can also access the LayoutManager using the static LayoutManager.getInstance() method.

See also



Public Properties
 PropertyDefined By
 Inheritedconstructor : Object
A reference to the class object or constructor function for a given object instance.
Object
 Inheritedprototype : Object
[static] A reference to the prototype object of a class or function object.
Object
  usePhasedInstantiation : Boolean
A flag that indicates whether the LayoutManager allows screen updates between phases.
LayoutManager
Public Methods
 MethodDefined By
  
Constructor.
LayoutManager
 Inherited
addEventListener(type:String, listener:Function, useCapture:Boolean = false, priority:int = 0, useWeakReference:Boolean = false):void
Registers an event listener object with an EventDispatcher object so that the listener receives notification of an event.
EventDispatcher
 Inherited
Dispatches an event into the event flow.
EventDispatcher
  
[static] Returns the sole instance of this singleton class, creating it if it does not already exist.
LayoutManager
 Inherited
Checks whether the EventDispatcher object has any listeners registered for a specific type of event.
EventDispatcher
 Inherited
Indicates whether an object has a specified property defined.
Object
  
Called when a component changes in some way that its layout and/or visuals need to be changed.
LayoutManager
  
Adds an object to the list of components that want their validateProperties() method called.
LayoutManager
  
Adds an object to the list of components that want their validateSize() method called.
LayoutManager
  
Returns true if there are components that need validating; false if all components have been validated.
LayoutManager
 Inherited
Indicates whether an instance of the Object class is in the prototype chain of the object specified as the parameter.
Object
 Inherited
Indicates whether the specified property exists and is enumerable.
Object
 Inherited
removeEventListener(type:String, listener:Function, useCapture:Boolean = false):void
Removes a listener from the EventDispatcher object.
EventDispatcher
 Inherited
Sets the availability of a dynamic property for loop operations.
Object
 Inherited
Returns the string representation of this object, formatted according to locale-specific conventions.
Object
 Inherited
Returns the string representation of the specified object.
Object
  
validateClient(target:ILayoutManagerClient, skipDisplayList:Boolean = false):void
When properties are changed, components generally do not apply those changes immediately.
LayoutManager
  
When properties are changed, components generally do not apply those changes immediately.
LayoutManager
 Inherited
Returns the primitive value of the specified object.
Object
 Inherited
Checks whether an event listener is registered with this EventDispatcher object or any of its ancestors for the specified event type.
EventDispatcher
Events
 Event Summary Defined By
 Inherited[broadcast event] Dispatched when the Flash Player or AIR application gains operating system focus and becomes active.EventDispatcher
 Inherited[broadcast event] Dispatched when the Flash Player or AIR application operating loses system focus and is becoming inactive.EventDispatcher
Property Detail

usePhasedInstantiation

property
usePhasedInstantiation:Boolean

Language Version: ActionScript 3.0
Product Version: Flex 3
Runtime Versions: Flash Player 9, AIR 1.1

A flag that indicates whether the LayoutManager allows screen updates between phases. If true, measurement and layout are done in phases, one phase per screen update. All components have their validateProperties() and commitProperties() methods called until all their properties are validated. The screen will then be updated.

Then all components will have their validateSize() and measure() methods called until all components have been measured, then the screen will be updated again.

Finally, all components will have their validateDisplayList() and updateDisplayList() methods called until all components have been validated, and the screen will be updated again. If in the validation of one phase, an earlier phase gets invalidated, the LayoutManager starts over. This is more efficient when large numbers of components are being created an initialized. The framework is responsible for setting this property.

If false, all three phases are completed before the screen is updated.



Implementation
    public function get usePhasedInstantiation():Boolean
    public function set usePhasedInstantiation(value:Boolean):void
Constructor Detail

LayoutManager

()Constructor
public function LayoutManager()

Language Version: ActionScript 3.0
Product Version: Flex 3
Runtime Versions: Flash Player 9, AIR 1.1

Constructor.

Method Detail

getInstance

()method
public static function getInstance():LayoutManager

Language Version: ActionScript 3.0
Product Version: Flex 3
Runtime Versions: Flash Player 9, AIR 1.1

Returns the sole instance of this singleton class, creating it if it does not already exist.

Returns
LayoutManager — Returns the sole instance of this singleton class, creating it if it does not already exist.

invalidateDisplayList

()method 
public function invalidateDisplayList(obj:ILayoutManagerClient):void

Language Version: ActionScript 3.0
Product Version: Flex 3
Runtime Versions: Flash Player 9, AIR 1.1

Called when a component changes in some way that its layout and/or visuals need to be changed. In that case, it is necessary to run the component's layout algorithm, even if the component's size hasn't changed. For example, when a new child component is added, or a style property changes or the component has been given a new size by its parent.

Parameters

obj:ILayoutManagerClient — The object that changed.

invalidateProperties

()method 
public function invalidateProperties(obj:ILayoutManagerClient):void

Language Version: ActionScript 3.0
Product Version: Flex 3
Runtime Versions: Flash Player 9, AIR 1.1

Adds an object to the list of components that want their validateProperties() method called. A component should call this method when a property changes. Typically, a property setter method stores a the new value in a temporary variable and calls the invalidateProperties() method so that its validateProperties() and commitProperties() methods are called later, when the new value will actually be applied to the component and/or its children. The advantage of this strategy is that often, more than one property is changed at a time and the properties may interact with each other, or repeat some code as they are applied, or need to be applied in a specific order. This strategy allows the most efficient method of applying new property values.

Parameters

obj:ILayoutManagerClient — The object whose property changed.

invalidateSize

()method 
public function invalidateSize(obj:ILayoutManagerClient):void

Language Version: ActionScript 3.0
Product Version: Flex 3
Runtime Versions: Flash Player 9, AIR 1.1

Adds an object to the list of components that want their validateSize() method called. Called when an object's size changes.

An object's size can change for two reasons:

  1. The content of the object changes. For example, the size of a button changes when its label is changed.
  2. A script explicitly changes one of the following properties: minWidth, minHeight, explicitWidth, explicitHeight, maxWidth, or maxHeight.

When the first condition occurs, it's necessary to recalculate the measurements for the object. When the second occurs, it's not necessary to recalculate the measurements because the new size of the object is known. However, it's necessary to remeasure and relayout the object's parent.

Parameters

obj:ILayoutManagerClient — The object whose size changed.

isInvalid

()method 
public function isInvalid():Boolean

Language Version: ActionScript 3.0
Product Version: Flex 3
Runtime Versions: Flash Player 9, AIR 1.1

Returns true if there are components that need validating; false if all components have been validated.

Returns
Boolean — Returns true if there are components that need validating; false if all components have been validated.

validateClient

()method 
public function validateClient(target:ILayoutManagerClient, skipDisplayList:Boolean = false):void

Language Version: ActionScript 3.0
Product Version: Flex 3
Runtime Versions: Flash Player 9, AIR 1.1

When properties are changed, components generally do not apply those changes immediately. Instead the components usually call one of the LayoutManager's invalidate methods and apply the properties at a later time. The actual property you set can be read back immediately, but if the property affects other properties in the component or its children or parents, those other properties may not be immediately updated.

To guarantee that the values are updated, you can call the validateClient() method. It updates all properties in all components whose nest level is greater than or equal to the target component before returning. Call this method only when necessary as it is a computationally intensive call.

Parameters

target:ILayoutManagerClient — The component passed in is used to test which components should be validated. All components contained by this component will have their validateProperties(), commitProperties(), validateSize(), measure(), validateDisplayList(), and updateDisplayList() methods called.
 
skipDisplayList:Boolean (default = false) — If true, does not call the validateDisplayList() and updateDisplayList() methods.

validateNow

()method 
public function validateNow():void

Language Version: ActionScript 3.0
Product Version: Flex 3
Runtime Versions: Flash Player 9, AIR 1.1

When properties are changed, components generally do not apply those changes immediately. Instead the components usually call one of the LayoutManager's invalidate methods and apply the properties at a later time. The actual property you set can be read back immediately, but if the property affects other properties in the component or its children or parents, those other properties may not be immediately updated. To guarantee that the values are updated, you can call the validateNow() method. It updates all properties in all components before returning. Call this method only when necessary as it is a computationally intensive call.