Adobe® Flex® 4 Language Reference
Show Packages and Classes List |  Packages  |  Classes  |  Index  |  Appendixes
flash.utils 
Timer 
Packageflash.utils
Classpublic class Timer
InheritanceTimer Inheritance EventDispatcher Inheritance Object

Language Version: ActionScript 3.0
Runtime Versions: AIR 1.0 Flash Player 9, Flash Lite 4

The Timer class is the interface to timers, which let you run code on a specified time sequence. Use the start() method to start a timer. Add an event listener for the timer event to set up code to be run on the timer interval.

You can create Timer objects to run once or repeat at specified intervals to execute code on a schedule. Depending on the SWF file's framerate or the runtime environment (available memory and other factors), the runtime may dispatch events at slightly offset intervals. For example, if a SWF file is set to play at 10 frames per second (fps), which is 100 millisecond intervals, but your timer is set to fire an event at 80 milliseconds, the event will be dispatched close to the 100 millisecond interval. Memory-intensive scripts may also offset the events.

View the examples



Public Properties
 PropertyDefined By
 Inheritedconstructor : Object
A reference to the class object or constructor function for a given object instance.
Object
  currentCount : int
[read-only] The total number of times the timer has fired since it started at zero.
Timer
  delay : Number
The delay, in milliseconds, between timer events.
Timer
 Inheritedprototype : Object
[static] A reference to the prototype object of a class or function object.
Object
  repeatCount : int
The total number of times the timer is set to run.
Timer
  running : Boolean
[read-only] The timer's current state; true if the timer is running, otherwise false.
Timer
Public Methods
 MethodDefined By
  
Timer(delay:Number, repeatCount:int = 0)
Constructs a new Timer object with the specified delay and repeatCount states.
Timer
 Inherited
addEventListener(type:String, listener:Function, useCapture:Boolean = false, priority:int = 0, useWeakReference:Boolean = false):void
Registers an event listener object with an EventDispatcher object so that the listener receives notification of an event.
EventDispatcher
 Inherited
Dispatches an event into the event flow.
EventDispatcher
 Inherited
Checks whether the EventDispatcher object has any listeners registered for a specific type of event.
EventDispatcher
 Inherited
Indicates whether an object has a specified property defined.
Object
 Inherited
Indicates whether an instance of the Object class is in the prototype chain of the object specified as the parameter.
Object
 Inherited
Indicates whether the specified property exists and is enumerable.
Object
 Inherited
removeEventListener(type:String, listener:Function, useCapture:Boolean = false):void
Removes a listener from the EventDispatcher object.
EventDispatcher
  
Stops the timer, if it is running, and sets the currentCount property back to 0, like the reset button of a stopwatch.
Timer
 Inherited
Sets the availability of a dynamic property for loop operations.
Object
  
Starts the timer, if it is not already running.
Timer
  
Stops the timer.
Timer
 Inherited
Returns the string representation of this object, formatted according to locale-specific conventions.
Object
 Inherited
Returns the string representation of the specified object.
Object
 Inherited
Returns the primitive value of the specified object.
Object
 Inherited
Checks whether an event listener is registered with this EventDispatcher object or any of its ancestors for the specified event type.
EventDispatcher
Events
 Event Summary Defined By
 Inherited[broadcast event] Dispatched when the Flash Player or AIR application gains operating system focus and becomes active.EventDispatcher
 Inherited[broadcast event] Dispatched when the Flash Player or AIR application operating loses system focus and is becoming inactive.EventDispatcher
  Dispatched whenever a Timer object reaches an interval specified according to the Timer.delay property.Timer
  Dispatched whenever it has completed the number of requests set by Timer.repeatCount.Timer
Property Detail

currentCount

property
currentCount:int  [read-only]

Language Version: ActionScript 3.0
Runtime Versions: AIR 1.0 Flash Player 9, Flash Lite 4

The total number of times the timer has fired since it started at zero. If the timer has been reset, only the fires since the reset are counted.



Implementation
    public function get currentCount():int

delay

property 
delay:Number

Language Version: ActionScript 3.0
Runtime Versions: AIR 1.0 Flash Player 9, Flash Lite 4

The delay, in milliseconds, between timer events. If you set the delay interval while the timer is running, the timer will restart at the same repeatCount iteration.

Note: A delay lower than 20 milliseconds is not recommended. Timer frequency is limited to 60 frames per second, meaning a delay lower than 16.6 milliseconds causes runtime problems.



Implementation
    public function get delay():Number
    public function set delay(value:Number):void

Throws
Error — Throws an exception if the delay specified is negative or not a finite number.

repeatCount

property 
repeatCount:int

Language Version: ActionScript 3.0
Runtime Versions: AIR 1.0 Flash Player 9, Flash Lite 4

The total number of times the timer is set to run. If the repeat count is set to 0, the timer continues forever or until the stop() method is invoked or the program stops. If the repeat count is nonzero, the timer runs the specified number of times. If repeatCount is set to a total that is the same or less then currentCount the timer stops and will not fire again.



Implementation
    public function get repeatCount():int
    public function set repeatCount(value:int):void

running

property 
running:Boolean  [read-only]

Language Version: ActionScript 3.0
Runtime Versions: AIR 1.0 Flash Player 9, Flash Lite 4

The timer's current state; true if the timer is running, otherwise false.



Implementation
    public function get running():Boolean
Constructor Detail

Timer

()Constructor
public function Timer(delay:Number, repeatCount:int = 0)

Language Version: ActionScript 3.0
Runtime Versions: AIR 1.0 Flash Player 9, Flash Lite 4

Constructs a new Timer object with the specified delay and repeatCount states.

The timer does not start automatically; you must call the start() method to start it.

Parameters
delay:Number — The delay between timer events, in milliseconds. A delay lower than 20 milliseconds is not recommended. Timer frequency is limited to 60 frames per second, meaning a delay lower than 16.6 milliseconds causes runtime problems.
 
repeatCount:int (default = 0) — Specifies the number of repetitions. If zero, the timer repeats infinitely. If nonzero, the timer runs the specified number of times and then stops.

Throws
Error — if the delay specified is negative or not a finite number

Example  ( How to use this example )

In the following example, the user is given 90 seconds to enter a response in an input text field. Also, every 30 seconds, a status message lets the user know how many seconds are left.

A Timer object is created that starts in 30 seconds (delay is set to 30000 milliseconds) and repeats three times, for a total of 90 seconds. (The timer stops after the third time.)

Two event listeners are added for the myTimer timer. The first is triggered by the TimerEvent.TIMER event, which occurs every time the timer is started. The timerHandler() method changes the text for the statusTextField text field to reflect the seconds remaining.

Note: The Timer class keeps track of the number of times it has to start (repeats) by increasing the number in the currentCount property.)

After the timer is called for the last time, the TimerEvent.TIMER_COMPLETE event is dispatched and the completeHandler() method is called. The completeHandler() method changes the type of the inputTextField text field from INPUT to DYNAMIC, which means the user can no longer enter or change text.

package {
    import flash.display.Sprite;
    import flash.text.TextField;
    import flash.text.TextFieldType;
    import flash.text.TextFieldAutoSize;
    import flash.utils.Timer;
    import flash.events.TimerEvent;
    import flash.events.Event;

    public class Timer_constructorExample extends Sprite {
            private var statusTextField:TextField = new TextField();        
            private var inputTextField:TextField = new TextField();
            private var delay:uint = 30000;
            private var repeat:uint = 3;
            private var myTimer:Timer = new Timer(delay, repeat);
            
        public function Timer_constructorExample() {
            inputTextField.x = 10;
            inputTextField.y = 10;
            inputTextField.border = true;
            inputTextField.background = true;
            inputTextField.height = 200;
            inputTextField.width = 200;
            inputTextField.multiline = true;
            inputTextField.wordWrap = true;
            inputTextField.type = TextFieldType.INPUT;

            statusTextField.x = 10;
            statusTextField.y = 220;
            statusTextField.background = true;
            statusTextField.autoSize = TextFieldAutoSize.LEFT;   

            myTimer.start(); 
            statusTextField.text = "You have " + ((delay * repeat) / 1000) 
                                 + " seconds to enter your response.";

            myTimer.addEventListener(TimerEvent.TIMER, timerHandler);
            myTimer.addEventListener(TimerEvent.TIMER_COMPLETE, completeHandler);

            addChild(inputTextField);
            addChild(statusTextField);
        }

        private function timerHandler(e:TimerEvent):void{
            repeat--;
            statusTextField.text = ((delay * repeat) / 1000) + " seconds left.";
        }

        private function completeHandler(e:TimerEvent):void {
            statusTextField.text = "Times Up.";
            inputTextField.type = TextFieldType.DYNAMIC;    
        }
    }
}
Method Detail

reset

()method
public function reset():void

Language Version: ActionScript 3.0
Runtime Versions: AIR 1.0 Flash Player 9, Flash Lite 4

Stops the timer, if it is running, and sets the currentCount property back to 0, like the reset button of a stopwatch. Then, when start() is called, the timer instance runs for the specified number of repetitions, as set by the repeatCount value.

See also

start

()method 
public function start():void

Language Version: ActionScript 3.0
Runtime Versions: AIR 1.0 Flash Player 9, Flash Lite 4

Starts the timer, if it is not already running.

stop

()method 
public function stop():void

Language Version: ActionScript 3.0
Runtime Versions: AIR 1.0 Flash Player 9, Flash Lite 4

Stops the timer. When start() is called after stop(), the timer instance runs for the remaining number of repetitions, as set by the repeatCount property.

See also

Event Detail

timer

Event
Event Object Type: flash.events.TimerEvent
property TimerEvent.type = flash.events.TimerEvent.TIMER

Language Version: ActionScript 3.0
Runtime Versions: AIR 1.0 Flash Player 9, Flash Lite 4

Dispatched whenever a Timer object reaches an interval specified according to the Timer.delay property.

Defines the value of the type property of a timer event object.

This event has the following properties:

PropertyValue
bubblesfalse
cancelablefalse; there is no default behavior to cancel.
currentTargetThe object that is actively processing the Event object with an event listener.
targetThe Timer object that has reached its interval.

timerComplete

Event  
Event Object Type: flash.events.TimerEvent
property TimerEvent.type = flash.events.TimerEvent.TIMER_COMPLETE

Language Version: ActionScript 3.0
Runtime Versions: AIR 1.0 Flash Player 9, Flash Lite 4

Dispatched whenever it has completed the number of requests set by Timer.repeatCount.

Defines the value of the type property of a timerComplete event object.

This event has the following properties:

PropertyValue
bubblesfalse
cancelablefalse; there is no default behavior to cancel.
currentTargetThe object that is actively processing the Event object with an event listener.
targetThe Timer object that has completed its requests.
TimerExample.as

The following example uses the class TimerExample to show how a listener method timerHandler() can be set to listen for a new TimerEvent to be dispatched. The timer is started when start() is called, and after that point, the timer events are dispatched.
package {
    import flash.utils.Timer;
    import flash.events.TimerEvent;
    import flash.display.Sprite;

    public class TimerExample extends Sprite {

        public function TimerExample() {
            var myTimer:Timer = new Timer(1000, 2);
            myTimer.addEventListener("timer", timerHandler);
            myTimer.start();
        }

        public function timerHandler(event:TimerEvent):void {
            trace("timerHandler: " + event);
        }
    }
}