XPenology

Installation

Créer un Bridge

sudo ip link add vmbr2 type bridge
sudo addr add 192.168.0.0/24 dev vmbr2
sudo ip link set vmbr2 up

Ajouter la création du Bridge dans la config

sudo vim /etc/network/interfaces

auto vmbr2
iface vmbr2 inet static
    address 192.168.0.254
    netmask 255.255.255.0
    bridge_ports none
    bridge_stp off
    bridge_fd 0
    post-up echo 1 > /proc/sys/net/ipv4/ip_forward
    post-up iptables -t nat -A POSTROUTING -s '192.168.0.0/24' -o eth0 -j MASQUERADE
    post-down iptables -t nat -D POSTROUTING -s '192.168.0.0/24' -o eth0 -j MASQUERADE

sudo vim /etc/init.d/rc.local

iptables -t nat -A PREROUTING -j DNAT -d YOUR_HOST_IP_ADDRESS -p tcp --dport 5000 --to 192.168.0.1
iptables -t nat -A POSTROUTING -s 192.168.0.0/24 -j MASQUERADE

VirtualBox

Installer synobox.ova en double cliquant dessus.

La VM doit utiliser “Bridged Adapter” avec “vmbr2”.