set nickname = neolao set username = nickname@gmail.com #set password = yourpassword set server = talk.google.com #set port = 5222 set ssl = 1 set ssl_verify = 0 #set resource = mcabber #set ignore_self_presence = 1 set pinginterval = 40 #set lang = en set cmdhistory_lines = 250 # History logging # You can save the messages history: set logging = 1 # Set 'logging_ignore_status' to 1 if you do not want to save status changes # (and status messages) to the log files (default: 0). # You can load (read) the messages history: set load_logs = 1 # If you enable load_logs, you can use the 'max_history_age' setting below. # Default logging directory (logging_dir) is $HOME/.mcabber/histo/ # Defaults for logging, load_logs are 0 (disabled) # Note: the logging directory must exist if you enable logging, mcabber # will not create it. # Note: these options, except 'max_history_age' and 'max_history_blocks', # are used at startup time. set logging = 1 set load_logs = 1 set logging_dir = ~/.mcabber/histo/ set logging_ignore_status = 1 # Set log_muc_conf to 1 to enable MUC chatrooms logging (default = 0) #set log_muc_conf = 1 # Set load_muc_logs to 1 to read MUC chatrooms logs (default = 0). These # logs will be displayed in the buffer window _before_ any history received # from the server. #set load_muc_logs = 0 # When load_logs (or load_muc_logs) is enabled, you can specify a maximum # number of history days to load into memory with max_history_age. # Default = 0 (disabled -- everything is loaded) # Note: this option is only used when reading history files, not later. #set max_history_age = 0 # mcabber can store the list of unread messages in a state file, # so that the message flags are set back at next startup. # Note that 'logging' must be enabled for this feature to work. #set statefile = ~/.mcabber/mcabber.state # You can specify a maximum number of data blocks per buffer (1 block contains # about 8kB). The default is 0 (unlimited). If set, this value must be > 2. #set max_history_blocks = 8 # Beep # Set beep_on_message to 1 if you want mcabber to beep when receiving # a new message (except in chatrooms). If you want a more sophisticated # system (e.g. play a sound), have a look at 'events_command' below. set beep_on_message = 1 # External command for events # You can specify a script or process to be launched when an event occurs. # Set 'events_ignore_active_window' to 1 if you don't want the script to # be run for a message to the current active window (default: 0). # # If 'event_log_files' is set, a file is created and contains the body of # the message (incoming messages only); the file name is the last parameter. # If you enable this, you can specify the directory mcabber will use to # create these messages with the 'event_log_dir' variable (default is the # system temp dir, or MCABBERTMPDIR environment variable). Please note # that mcabber won't delete these files, it's your script's job. # # The command is called the following way: # $events_command MSG IN jabber@id [file] (when receiving a message) # $events_command MSG OUT jabber@id (when sending a message) # $events_command MSG MUC room_id [file] (when receiving a MUC message) # $events_command STATUS X jabber@id (new buddy status is X) # $events_command UNREAD N (number of unread buddy buffers) # See sample script in contrib/ directory. #set events_command = ~/.mcabber/eventcmd # #set events_ignore_active_window = 0 # #set event_log_files = 0 #set event_log_dir = ~/.mcabber/event_files # If you set 'eventcmd_use_nickname' to 1, mcabber will pass the nickname # (if it is defined) to the event script instead of the JID (default: 0). #set eventcmd_use_nickname = 0 # External command status check # You can request mcabber to inspect exit status value after each # events_command. If this option is set, mcabber will beep if the # exit value is 2. #set eventcmd_checkstatus = 0 # Internal hooks # You can ask mcabber to execute an internal command when a special event # occurs (for example when it connects to the server). # # 'hook-post-connect' is executed when mcabber has connected to the server # and the roster has been received. #set hook-post-connect = status dnd # # 'hook-pre-disconnect' is executed just before mcabber disconnects from # the server. #set hook-pre-disconnect = say_to foo@bar Goodbye! # FIFO # mcabber can create a FIFO named pipe and listen to this pipe for commands. # Default: disabled. # Set 'fifo_hide_commands' to 1 if you don't want to see the FIFO commands # in the log window (they will still be written to the tracelog file). # When FIFO is configured, you can turn it off and on in real time with # the 'fifo_ignore' option (default: 0). When set to 1, the FIFO input is # still read but it is discarded. #set fifo_name = ~/.mcabber/mcabber.fifo #set fifo_hide_commands = 0 #set fifo_ignore = 0 # Traces logging # If you want advanced traces, please specify a file and a level here. # There are currently 2 traceloglog levels: # lvl 1: most events of the log window are written to the file # lvl 2: debug logging (XML, etc.) # Default is level 0, no trace logging #set tracelog_level = 1 #set tracelog_file = ~/.mcabber/mcabber.log # Set the auto-away timeout, in seconds. If set to a value >0, # mcabber will change your status to away if no real activity is detected # (command, message, move in the buddylist...). Note: auto-away only changes # the status when it is "available" (online) or "free_for_chat". # See 'message_autoaway' below. #set autoaway = 0 # Message blocking # Set 'block_unsubscribed' to 1 if you want to block (drop) incoming # messages from people you haven't authorized. (default: 0) #set block_unsubscribed = 0 # Set 'delete_on_reject' to 1 if you want to delete buddies from your # roster when you reject their subscription request. (default: 0) # (See documentation for /event) # The buddy is actually deleted only if there is no other subscription, # so for example if you are subscribed to this buddy's presence updates it # won't be deleted. #set delete_on_reject = 0 # MUC # Set 'muc_flag_joins' to 1 if you want the MUC rooms to be flagged in # the roster when somebody joins a room. Set it to 2 if you want a flag # for leaves too. set muc_flag_joins = 0 # Set 'muc_print_status' to see status changes in MUC rooms: # 1: (none) do not display joining/leaving members # 2: (in_and_out) display joining/leaving members # 3: (all) display joining/leaving members and member status changes # (default: in_and_out) set muc_print_status = 1 # Set 'muc_auto_whois' to 1 if you want to call /room whois each time # somebody joins a room. (default: 0) #set muc_auto_whois = 0 # Set 'muc_disable_nick_hl' to 1 if you don't want mcabber to color lines # containing your nickname in a MUC room. #set muc_disable_nick_hl = 0 # Status messages # The 'message' value will override all others, take care! #set message = Unique message status #set message_avail = I'm available #set message_free = I'm free for chat #set message_dnd = Please do not disturb #set message_notavail = I'm not available #set message_away = I'm away # The auto-away message is only used when 'autoaway' is set. The previous # message will be restored when leaving auto-away status. If this message # isn't defined, the status message will stay unchanged. #set message_autoaway = Auto-away (idle) # Escape timeout delay (ESCDELAY) # The ESCDELAY variable specifies the time, in milliseconds, for which # the ncurses interface will await a character sequence. # The default is 1000 (1 second). # If you want mcabber to react faster after hitting Escape, you can lower # this value by setting the ESCDELAY environment variable or setting the # 'escdelay' option. #set escdelay = 50 # Colors # Colors are: black, red, green, yellow, blue, magenta, cyan, white # For text colors (i.e. not background and bg* colors) you can also use # the "bright" prefix to get a bright/bold color. Example: brightblue # You can use the "default" color, too (i.e. for transparent background). # If your terminal supports 256 colors, you can use the color number # directly (16-255). # # Have a look at the contrib/themes/ directory to see some sample # color settings. # # background: background color of the chat window and the log window # general: text color in the chat window and the log window # info: text color in the chat window for info messages # msgin: text color in the chat window for incoming messages # msgout: text color in the chat window for outgoing messages # msghl: text color in the chat window for highlighted messages (MUC) # bgstatus: background color of the status lines # status: text color of the status lines # roster: text color of the roster (buddylist) normal items # bgrostersel: background color of the selected roster item # rostersel: text color of the selected roster item # rosterselmsg:text color of the selected roster item, if there is a new msg # rosternewmsg: text color of items with unread messages # set color_background = black set color_general = white set color_info = white set color_msgin = white set color_msgout = cyan set color_msghl = yellow set color_bgstatus = blue set color_status = white set color_roster = green set color_bgrostersel = cyan set color_rostersel = blue set color_rosterselmsg = red set color_rosternewmsg = red # You can color roster items by their status and JID. For example, to have # all roster items white, just all contacts from jabber.org that are away, # not available or do not disturb yellow, you do this: # #color roster * * white #color roster adn *@jabber.org yellow # You can let mcabber color nicks in MUC. # These colors will by used automatically: #set nick_colors = red green blue # This turns coloring of all mucs on: color muc * on # If you want someone's nick to be the same all the time: #color mucnick my_friend yellow # Style # Note: the 'log_win_height' and 'roster_width' values below can be set # in real time when mcabber is running. Refresh the screen (Ctrl-l) to # use the new values. # Log window height (minimum 1, default 5) set log_win_height = 10 # Buddylist window width (minimum 2, default 24) set roster_width=34 # The options 'log_win_on_top' and 'roster_win_on_right' can change the # position of the log window (top/bottom) and the position of the roster # (left/right). #set log_win_on_top = 0 set roster_win_on_right = 1 # By default, the displayed name of a contact in the roster window will # be the jid if no name has been specified. You can use the following # option if you only want to see the username part. set roster_hide_domain = 0 # Buddy name format (in status window): # - 0: (default) "" # - 1: "name " (name is omitted if same as the jid) # - 2: "name/resource" (if the name is the same as the jid, use ) # - 3: "name" (if the name is the same as the jid, use ) set buddy_format = 3 # Time format: # - 0: (default) Date and time # - 1: Time only # - 2: None #set time_prefix = 0 # When a contact sends "/me ", mcabber displays "*user ", where user # is the local part of the contact's jid. # If you want mcabber to display the complete bare jid (user@server.com), # set 'buddy_me_fulljid' to 1 (default: 0) #set buddy_me_fulljid h /info. #pgp disable foo@bar.org #pgp setkey bar@foo.net C9940A9BB0B92210 # OTR (Off-The-Record messaging) support # (Only available if mcabber is built with OTR support) # Set otr to 1 to enable OTR support. # You cannot change this option once mcabber is running. #set otr = 0 # # OTR directory # You can specify the OTR directory with the otr_dir option # (default = ~/.mcabber/otr/). #set otr_dir = "~/.mcabber/otr/" # Aliases #alias me = say /me #alias online = status online #alias away = status away #alias dnd = status dnd #alias notavail = status notavail #alias names = room names #alias topic = room topic # Key bindings # Ctlr-q (17) bound to /roster unread_next #bind 17 = roster unread_next # Ctlr-x (24) bound to /roster alternate #bind 24 = roster alternate # F5 (269) bound to /roster toggle_offline (centericq-like, IIRC) #bind 269 = roster toggle_offline # F12 (276) bound to /roster toggle #bind 276 = roster toggle # Ctrl-Up/Ctrl-Down bound to /buffer up/down (like Ctrl-p/Ctrl-n) #bind 521 = buffer up #bind 514 = buffer down # Shift + down bind 513 = roster down # Shift + up bind 520 = roster up # Shift + left bind 402 = group toggle # Sample alias to join mcabber channel with "/jmc" #alias jmc = room join mcabber@conf.lilotux.net